Hi All,
Time to build the turtledeck. Classic plans call for 3/8 od "soft" aluminum tube.
Versatube looks to fit the bill. Anyone remember what they used? Or, a reason I shouldn't use Versatube.
Input would be appreciated.
Thanks
Material for turtledeck formers.
-
Bitshifter
- Posts: 202
- Joined: Thu Aug 02, 2012 5:12 pm
- Location: Avondale Pa
- Contact:
Re: Material for turtledeck formers.
I used 3/8 soft aluminum tube from Aircraft Spruce and set it on pins welded to the top of the longerons. I did the same on the bottom of the fuselage.
Ed White
HC 154
"In life 10% wrong is failure, in school it's an A"
HC 154
"In life 10% wrong is failure, in school it's an A"
-
HC85
- Posts: 114
- Joined: Sat Aug 03, 2013 5:34 pm
Re: Material for turtledeck formers.
I did the same as Ed. Worked out good.
This is filler because for some reason you have to post 50 Characters for the Post to be valid??
This is filler because for some reason you have to post 50 Characters for the Post to be valid??