HC #86 Update
-
splischke
- Posts: 115
- Joined: Thu Mar 18, 2010 8:41 pm
- Contact:
HC #86 Update
I just finished cutting the finishing the floor boards. It was a bit tedious work but I enjoyed it. The EV-400 Epoxy varnish really shines!
You do not have the required permissions to view the files attached to this post.
Scott Plischke. Building Hatz Classic #86 from plans. See http://www.thehatz.com
-
PoconoJohn
- Posts: 133
- Joined: Tue Mar 06, 2012 3:57 pm
Re: HC #86 Update
I enjoy the photos on your website; they help a lot. Looking good there Scott.
John Cronin
HC 149
HC 149
-
jwhanson
- Posts: 96
- Joined: Tue Mar 16, 2010 11:55 pm
Re: HC #86 Update
Here is a suggestion that worth adding on the Classic with the stepped floor boards.
John Hanson
John Hanson
You do not have the required permissions to view the files attached to this post.
-
splischke
- Posts: 115
- Joined: Thu Mar 18, 2010 8:41 pm
- Contact:
Re: HC #86 Update
Great idea and easy to implement. Thanks!
-Scott
-Scott
Scott Plischke. Building Hatz Classic #86 from plans. See http://www.thehatz.com
-
Bitshifter
- Posts: 202
- Joined: Thu Aug 02, 2012 5:12 pm
- Location: Avondale Pa
- Contact:
Re: HC #86 Update
Can anyone explain the reason that the floor is higher in the rear of the Classic. To me the step seems to create a problem with the ruder pedals. I like the ramp suggestion but why not just make both floors the same elevation. Is there any interference that I am not seeing?
Ed White
HC 154
"In life 10% wrong is failure, in school it's an A"
HC 154
"In life 10% wrong is failure, in school it's an A"
-
dougm
- Posts: 498
- Joined: Wed Mar 17, 2010 2:39 pm
- Location: Douglas, MA
- Contact:
Re: HC #86 Update
The raised floor provides clearance for the aileron push tubes which run under the floor.
Doug
Building Hatz Classic s/n 093 & Rotec R3600
Hatz Webmaster
Building Hatz Classic s/n 093 & Rotec R3600
Hatz Webmaster