by orchardair » Tue Nov 12, 2019 1:58 pm
Others have reached this point before (duh) but this is one of those right-of-passage points in the build process, so here are my photos of the parts.
According to plans:
IMG_20191109_174819.jpg
After fitting:
IMG_20191109_180649.jpg
In place, with spacers:
00100dPORTRAIT_00100_BURST20191110093358874_COVER.jpg
What do you do with the gap between the plates and the cross member?
IMG_20191110_102600.jpg
Others have reached this point before (duh) but this is one of those right-of-passage points in the build process, so here are my photos of the parts.
According to plans:
[attachment=3]IMG_20191109_174819.jpg[/attachment]
After fitting:
[attachment=2]IMG_20191109_180649.jpg[/attachment]
In place, with spacers:
[attachment=1]00100dPORTRAIT_00100_BURST20191110093358874_COVER.jpg[/attachment]
What do you do with the gap between the plates and the cross member?
[attachment=0]IMG_20191110_102600.jpg[/attachment]