by stearmoth » Wed Jan 18, 2012 3:25 am
Hi Nick,
We would suggest not to relay on a paper rib template, as it it possible that it doesn't match your wing profile form. We made our template as follows:
Place ( temporarily attach) the butt rib (flat bottom, otherwise oversize) with the cut outs for the the spars and brackets at the 1,5° angle to the top wing root. Then trace a line with a ruler (lenght must be at least 25", which is more than to rib bays), which has a sharp pencil mounted ( the pencil must align with the ruler's bottom) along the oversize butt rib by slideing it along the rib contour.
You got it? That way you get an accurate rib, which matches your actual wing profile.
Kind regards
Hans & Sam, H.C. #78, Switzerland
Hi Nick,
We would suggest not to relay on a paper rib template, as it it possible that it doesn't match your wing profile form. We made our template as follows:
Place ( temporarily attach) the butt rib (flat bottom, otherwise oversize) with the cut outs for the the spars and brackets at the 1,5° angle to the top wing root. Then trace a line with a ruler (lenght must be at least 25", which is more than to rib bays), which has a sharp pencil mounted ( the pencil must align with the ruler's bottom) along the oversize butt rib by slideing it along the rib contour.
You got it? That way you get an accurate rib, which matches your actual wing profile.
Kind regards
Hans & Sam, H.C. #78, Switzerland